Jun 062013
 

This generates the hydraulic energy (oil). It is fastened with vibration dampers onto the body. The electric pump consists of a gear pump of approx. 0.25 cm3 /rev, drawn by a joint from a 12V d.c. electric motor through a relay controlled by the control unit CFC 208F. The electric pump is activated when the accumulated pressure is < 45 bar and it switches off when the accumulated pressure is > 55 bar. The electric motor and the pump are fastened to each other with screws by a flange. There are two threaded holes for intake (I) and delivery (U), that are connected to the oil tank and the user respectively by pipes with flexible unions. The hydraulic tank, fitted with a filter, has a capacity of approx. 0.5 I.

Electric pump and connector

Electric pump and connector

Description

  1. Ground
  2. +12V power supply
  3. I. Inlet
  4. U. Outlet
 Posted by at 4:21 pm