Jan 312018
 
  1. Set the ignition key to MAR.
  2. Connect the Examiner diagnostics tool and select the display of the input states (ON/OFF) for the auto button.
  3. Press and release the automatic operation selection button at the base of the gear lever (this check is to be made with the engine running).
  4. Check on Examiner that the status has changed.
  5. Start the engine and check that when the button is pressed “CITY” is seen on the display.
  6. If the status does not change (step 4) and/or “CITY” is not displayed (step 5.), check the button and the wiring.
 Posted by at 7:11 pm