Jan 312018
 
  1. Set the ignition key to MAR.
  2. Connect the Examiner diagnostics tool and select the “LEVERS STATUS” display in parameters environment.
  3. Make all the selections possible with the buttons on the steering wheel and the gear lever (one at a time) checking the correct status change on Examiner; the list of the selections to be made is the following:
    • Lever Up (+) (forward)
    • Lever Down (-) (backward)
    • RH button Up on steering wheel (+)
    • LH button Down on steering wheel (-)
    • Lever on idle (N)
    • Lever on Reverse (R)
    • Buttons and lever released
  4. If the status displayed is not correct, check the wiring and gearshift buttons/lever.
 Posted by at 7:32 pm