Jan 312018
 
  1. Set the ignition key to MAR.
  2. Connect the Examiner diagnostics tool.
  3. Check that the clutch position is between 28 and 28,5 mm; if it is not, continue with the next step.
  4. Loosen the lock nut (1c in Fig.9) and adjust the stop pin (1a) so that the clutch position value read on Examiner is between 28 and 28.5 mm.
  5. Tighten the lock nut to a torque of 0.6 ± 0.05 daNm and measure again
 Posted by at 7:07 pm